Anet A8電子箱（主板、octopi、降壓轉換器、繼電器和風扇）

This is a remix/overhaul of a previous case for the Anet A8. i have cleaned up the cases mounting and other areas. changed the cable opening and moved a bit of the mounting locatio. i have added a step-down converter mount and mounting location under the raspberry pis mounting location. the arrow on this mount goes with the arrow on the converter. I have also added fan mounting and cove. one set will work with the fa included mounting screws with 2 attaching the fan to the case and 2 attaching the cover to the fan. the other set needed a M3x25mm screws to go from the cover to the case cover with the fan wedged between.
EDIT: V8 i have added a hole on the bottom right of the case (when its standing up) for the left z axis moto wires.
Components recommended:
To control the printer. Raspberry PI 3 Model B
To allow the raspberry pi to power the printer on and off Channel DC 5V Relay Switch Module for Arduino Raspberry Pi ARM AVR
This is for the Pi to control the printer. there isnt much room for a long cable, or you can cut the included cable down to size and splice together. 6 Inch Micro USB Cable
To drop power from 12V PSU to 5v for Raspberry Pi SMAKN? 5pcs Mini MP1584EN Step-down Power DC-DC 3A Ultra Adjustable LM2596
The full cover is sized for a slim 80mm fan. As i wanted as low of a profile as i could. Cooler Master Sleeve Bearing 80mm Slim Silent Fan
x20 M3x6mm Self Tapping Screws. M3 Black Alloy Steel Allen Hex Socket Cap Head Self Tapping Screws
x4 M3x16mm Self Tapping Screws. (can be longer)
x4 M3x25mm Self Tapping Screws For Fan. (8 of these screws if you dont want to order 4x16mm and 4x25mm) (10) M3x25mm Hex Socket Tapping Button Head Black
m3 tapping hex
Cable Sleeving
eBay for anything else
Other Anet A8 Items:
Y Chain
Power Supply Cover
Mosfet Case