迪威網(wǎng)友57768d
發(fā)布時間：2020/10/18 6:54:00
This is essentially a file dump for my customizable shuriken made with myminifactorys customizer. You can either align the parts youelf in your slicer, or you can use the customizer to build and download a complete model.
The star itself is about 3mm thick, and flat on one side. It should be quite easy to print. You can also mirror the model in your slicer and glue the two halves together for a more traditional star.
A few small note on the core desig:
These symbols were pulled from some random stock art, and converted to SVG to use in my design. I don't actually know the meaning behind these, I just thought they looked cool.
Some of the desig have very small details. While this wont be a problem for resin printing, if you are printing FDM you should be sure you are selecting a core that your printer can handle.
The star itself is about 3mm thick, and flat on one side. It should be quite easy to print. You can also mirror the model in your slicer and glue the two halves together for a more traditional star.
A few small note on the core desig:
These symbols were pulled from some random stock art, and converted to SVG to use in my design. I don't actually know the meaning behind these, I just thought they looked cool.
Some of the desig have very small details. While this wont be a problem for resin printing, if you are printing FDM you should be sure you are selecting a core that your printer can handle.
|
共個文件
壓縮包大?。?MB
|
||
|---|---|---|
微信小程序
微信掃碼打開此模型
迪威模型
微信掃碼支付