迪威網友b60106
發(fā)布時間：2024/8/21 10:39:00
Y接頭和打印機接頭之間的管道請切成25 mm連接。
Cut the pipe between the Y joint and the joint of the printer to 25毫米and connect it。
請在打印機側的接頭上添加像照片一樣大的C倒角
Add a large C chamfer to the joint on the printer side as shown in the photo.
除了3D打印部件之外，還需要下列部件。
In addition to the 3D printed parts，the following parts are required.
M6螺釘-Φ4一觸式接頭：3個
M6screw-Φ4push-in fitting：3pcs
Https：//
M3x8的六角螺栓：2根
M3 x 8 Cap screw：2 pcs
Cut the pipe between the Y joint and the joint of the printer to 25毫米and connect it。
請在打印機側的接頭上添加像照片一樣大的C倒角
Add a large C chamfer to the joint on the printer side as shown in the photo.
除了3D打印部件之外，還需要下列部件。
In addition to the 3D printed parts，the following parts are required.
M6螺釘-Φ4一觸式接頭：3個
M6screw-Φ4push-in fitting：3pcs
Https：//
M3x8的六角螺栓：2根
M3 x 8 Cap screw：2 pcs
|
共個文件
壓縮包大?。?MB
|
||
|---|---|---|
微信小程序
微信掃碼打開此模型
迪威模型
微信掃碼支付